Problem : no traffic on on a second network interface card

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Problem : no traffic on on a second network interface card

wp10596728-4
Hi all,
B
I have a machine with 4.8 OpenBSD, which I want to use as a gateway.
But I can not get any traffic on the 2nd nic.
Forwarding for inet and inet6 is set =1
It is not a problem of the nics. If I install nic2 first then it works and
nic1
doesn't work.
It is also not a problem of PF, which disabled for testing.
B
Can anybody tell me what else do I need to mlook at?
B
B
Klaus

Reply | Threaded
Open this post in threaded view
|

Re: Problem : no traffic on on a second network interface card

rancor
Well, it would be nice to have some more info like dmesg, hostname.? and
other info to help you solve the problem.

// rancor
Den 28 jul 2011 12:51 skrev "wp10596728-4" <[hidden email]>:

> Hi all,
> B
> I have a machine with 4.8 OpenBSD, which I want to use as a gateway.
> But I can not get any traffic on the 2nd nic.
> Forwarding for inet and inet6 is set =1
> It is not a problem of the nics. If I install nic2 first then it works and
> nic1
> doesn't work.
> It is also not a problem of PF, which disabled for testing.
> B
> Can anybody tell me what else do I need to mlook at?
> B
> B
> Klaus

Reply | Threaded
Open this post in threaded view
|

Re: Problem : no traffic on on a second network interface card

wp10596728-4
ip address is of 192.168.
hostname is comaqs
domain name is domo.netB
B
dmesg is as follows, with this configuaration the nic which doesn't work is
the
vr0

B
OpenBSD 4.8 (GENERIC) #136: Mon Auf 16 09:06:23 MDT 2010
B B B B B B B  [hidden email]:/usr/src/arch/i386/compile/GENERICB
cpu0: AMD Duron(tm) processor (bAuthenticAMDb 686-class, 64KB L2 cache
1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,S
SE
real mem = 536379392 (511MB)
avail mem = 517648384 (493MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/10/03, BIOS rev. 0 @ 0xfb3b0, SMBIOS
rev. 2.2 @0xf0800 (34 entries)
bios0: vendor Phoenx Technologies, LTD version b6.00 PCb date 09/10/2003
bios0: VIA Technologies, Inc. VT8367-8235
apm0 at bios0: PowerManagement spec V1.2 (slowidle)
lapm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0: at bios0: rev. 2.1 @0xf0000/0xdf74
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdec0/176 (9 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0:Interrupt Router at 000:17:0 (bVIA VT82C596A ISAb rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0x0000/0xb000
cpu at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 bVIA VT8366 PCIb rev 0x00
viaagp0 at pchb: v2
agp0 at viaagp0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 bVIA VT8366 AGPb rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 bATI Radeon VEb rev 0x00
wsdisplay0 at vga1 mux 1:console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 11
drm0 at radeondrm0
re0 at pci0 dev 9 function 0 bRealtek 8169b rev 0x10: RTL8169/8110SB
(0x1000),
irq 10, address 74:ea:3a:81:f0:95
rgephy at re0 phy 7: RTL8169S/811oS PHY rev. 3
uhci0 at pci0 dev 16 function 0 bVIA VT83C572 USBb rev 0x80: irq 11
uhci1 at pci0 dev 16 function 1 bVIA VT83C572 USBb rev 0x80: irq 10
uhci2 at pci0 dev 16 function 2 bVIA VT83C572 USBb rev 0x80: irq 12
ehci0 at pci0 dev 16 function 3 bVIA VT6202 USBb rev 0x82: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 bVIA EHCI root hubb rev 2.00/1 addr 1
viapm0 at pci0 dev 17 function 0 bVIA VT8235 ISAb rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x52: 512MB DDR SDRAM non parity PC2700CL2.5
pciide0 at pci0 dev17 function 1 bVIA VT82C571 IDEb rev 0x06: ATA133,
channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLlct15 20>
wd0: 16-sector PIO, LBA, 19470MB, 39876480 sectors
wd1 at pciide0 channel 0 drive 1: <QUANTUM FIREBALLlct15 20>
wd0: 16-sector PIO, LBA, 19470MB, 39876480 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0:<TSSTcorp, CD/DVDW TS-H552B, TS03> ATAPI 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd0 at scsibus0 targ 0 lun 0:<RICOH, CD-R/RW MP7080A, 1.10> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4
vr0 at pci0 dev 18 function 0 bVIA Rhinell-2b rev 0x74: irq 11, address
00:0d:87:98:c3:61
ukphy0 at vr0 phy 1: GENERIC IEEE802.3u media interface, rev. 9: t usb1
bOUI
0x004063, model 0x0032
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 bVIA UHCI root hubb rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 bVIA UHCI root hubb rev 1.00/1.00 addr 1
usb1 at uhci2: USB revision 1.0
uhub3 at usb3 bVIA UHCI root hubb rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4; ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8705F rev 2, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f8/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
B
B


rancor <[hidden email]> hat am 28. Juli 2011 um 14:27 geschrieben:


> Well, it would be nice to have some more info like dmesg, hostname.? and
other

> info to help you solve the problem.
> // rancor
>
> Den 28 jul 2011 12:51 skrev "wp10596728-4" <[hidden email]
> [mailto:[hidden email]] >:
> > Hi all,
> > B
> > I have a machine with 4.8 OpenBSD, which I want to use as a gateway.
> > But I can not get any traffic on the 2nd nic.
> > Forwarding for inet and inet6 is set =1
> > It is not a problem of the nics. If I install nic2 first then it works
and
> > nic1
> > doesn't work.
> > It is also not a problem of PF, which disabled for testing.
> > B
> > Can anybody tell me what else do I need to mlook at?
> > B
> > B
> > Klaus